SAND CONE / REPLACEMENT TEST SET (T061)

image_pdfDownload Datasheetimage_printPrint

Product Code: T061

Category: SOIL

Sub-Category: DENSITY DETERMINATION

 

  • Used to determine the in-situ density of the fine grain compacted soil. The test consists of making a hole in the compacted soil layer, filling it with known-density soil sample from the container (plastic jar/sand pouring cylinder), then measuring the soil weight along with the water content
  • Contains a sand cone and a base plate that has an opening designed for the cone to sit into. The set also contains a container (plastic jar/sand pouring cylinder) to be used during the test.

STANDARDS
ASTM D1556 • AASHTO T191 • BS 1377-9 • BS 1924-2

SET

ASTM Set SAND CONE SET – Ø 6.5″ SAND CONE SET – Ø 12″
Double-Cone Cast-Aluminum (Ø 6.5″) Ø 12″
Base Plate Cast-Aluminum ●
Plastic Jar ● ○

BS Set SAND REPLACEMENT TEST SET – Ø 100 mm SAND REPLACEMENT TEST SET Ø 150 mm SAND REPLACEMENT TEST SET – Ø 200 mm
Cone Diameter Ø 100 mm Ø 150 mm Ø 200 mm
Base Plate ● ● ●
Sand Pouring Cylinder ● ● ●
Calibration Container Ø 100 mm x 150 mm Ø 150 mm x 200 mm Ø 200 mm x 250 mm

ORDERING INFORMATION

Item Code
SAND CONE SET – Ø 6.5″ T 061 X06A H
SAND CONE SET – Ø 12″ T 061 X12A H
SAND REPLACEMENT TEST SET – Ø 100 mm T 061 X10B H
SAND REPLACEMENT TEST SET Ø 150 mm T 061 X15B H
SAND REPLACEMENT TEST SET – Ø 200 mm T 061 X20B H
BASE PLATE for SAND CONE SET – Ø 6.5″ T 061 P001 H
CALIBRATING CONTAINER for SAND CONE SET – Ø 6.5″ T 061 P002 H
DOUBLE-CONE forSAND CONE SET – Ø 6.5″ T 061 P003 H
PLASTIC JAR for SAND CONE SET – Ø 6.5″ T 061 P004 H
BASE PLATE for SAND CONE SET – Ø 12″ T 061 P005 H
DOUBLE-CONE for SAND CONE SET – Ø 12″ T 061 P006 H
BASE PLATE for T-061/100 T 061 P007 H
CALIBRATING CONTAINER for T-061/100 T 061 P008 H
SAND POURING CYLINDER for T-061/100 T 061 P009 H
BASE PLATE for T-061/150 T 061 P010 H
CALIBRATING CONTAINER for T-061/150 T 061 P011 H
SAND POURING CYLINDER for T-061/150 T 061 P012 H
BASE PLATE for T-061/200 T 061 P013 H
CALIBRATING CONTAINER for T-061/200 T 061 P014 H
SAND POURING CYLINDER for T-061/200 T 061 P015 H
STEEL PEG T 061 P016 H
STANDARD SAND T 061 P017 H
TROWEL G 712 X001 H
HAMMER – 1 kg G 713 X010 H
HAMMER – 1.5 kg G 713 X015 H
HAMMER – 2 kg G 713 X020 H
HAMMER – 3 kg G 713 X030 H
RUBBER MALLET G 714 X001 H
DENSITY SPOON G 715 X001 H
FLAT CHISEL G 733 X001 H
POINT CHISEL G 733 X002 H
DENSITY PICK G 751 X001 H

Keywords:

Related Products