ABRASION TESTER for NATURAL STONES and CONCRETE TILES (R197)

Category: Aggregate

Product Code: R197

Category: AGGREGATE

Sub-Category: PHYSICAL PROPERTIES

 

  • Used to determine the abrasion-resistance of the natural stones and tiles. The test is carried out by abrading the face of a specimen which will be exposed in use with an abrasive material under standard conditions.
  • The abrasive required for this test is corundum (white fused alumina) with grit size of 80 in accordance with standard FEPA 42 F 1984. It shall not be used more than three times. (should be ordered separately)
  • The Abrasion Tester is essentially composed of a wide abrasion disc, a storage hopper, a clamping trolley, and a counterweight.
  • The wide abrasion disc diameter is 200 ± 1 mm and having a width of 70 ± 1 mm. It is driven to rotate 75 revolutions in (60 ± 3) seconds.
  • A mobile clamping trolley is mounted on bearings and forced to move forwards to the wheel by a counterweight having a mass of 14 ± 0,01kg.

TECHNICAL SPECIFICATIONS

  • Abrasion Disc Diameter : 200 ± 1 mm
  • Abrasion Disc Thickness : 70 ± 1 mm
  • Abrasion Disc Rotation : 75 rpm
  • 220 – 240 V / 50 – 60 Hz

EQUIPPED WITH

  • Abrasion Disc
    • Diameter 200 ± 1 mm
    • Thickness 70 ± 1 mm
  • Digital Revolution counter
  • Supplied less with White Corundum.

ORDERING INFORMATION

Code Item
R 197 X00E T WIDE WHEEL ABRASION TESTER for NATURAL STONES
R 197 X00E K WIDE WHEEL ABRASION TESTER for NATURAL STONES [60 Hz]
R 197 P001 H ABRASIVE POWDER (F80) – 1 kg

Keywords: