SURFACE SOIL SAMPLER (T058)
Category: Soil
Product Code: T058
Category: SOIL
Sub-Category: SAMPLE PREPARATION
- Used to determine the in-place density of soil by the drive-cylinder method. The test involves obtaining an intact soil sample by driving a thin-walled cylinder into the soil and conducting specific measurements and calculations for the determination of in-place density
- The apparatus can be used to determine the in-place density of soils which do not contain significant amounts of particles larger than 4.75 mm ( 3 ⁄ 16 in.), and which can be readily retained in the drive cylinder
- The apparatus may also be used to determine the in-place density of compacted soils used in construction of structural fill, highway embankments, or earth dams. When the in-place density is to be used as a basis for acceptance, the drive cylinder volumes must be as large as practical and not less than 850 cm3 (0.030 ft3).
STANDARDS
ASTM D2937 • BS 1377-9
ORDERING INFORMATION
| Item | Code |
| SURFACE SOIL SAMPLER (Drive-Cylinder Method) 4″ – ASTM SET | T 058 X00A H |
| THIN WALL SAMPLING TUBE – ASTM | T 058 P007 H |
| SLIDING WEIGHT 5 kg – ASTM | T 058 P008 H |
| SURFACE SOIL SAMPLER (Core Cutter) Ø 100 mm – BS SET | T 058 X10B H |
| CORE CUTTER Ø 100 mm – BS | T 058 P001 H |
| DRIVING DOLLY Ø 100 mm – BS | T 058 P002 H |
| DRIVING RAMMER Ø 100 mm – BS | T 058 P003 H |
| SURFACE SOIL SAMPLER (Core Cutter) Ø 150 mm – BS SET | T 058 X15B H |
| CORE CUTTER Ø 150 mm – BS | T 058 P004 H |
| DRIVING DOLLY Ø 150 mm – BS | T 058 P005 H |
| DRIVING RAMMER Ø 150 mm – BS | T 058 P006 H |
Keywords: