UTM, HYDRAULIC (U001)
Category: Universal
Product Code: U001
Category: UNIVERSAL
Sub-Category: UNIVERSAL TESTERS
Tensile Testing:
- Used to test the tensile strength of steel rebar.
- The grippers of the machine is hydraulically operated by 2 independent auxiliary cylinders controlled by separated hydraulic valves. Those grippers are designed to firmly hold the steel rebar and avoid any slipping that might happen during the test on the rebar.
- The upper mobile crosshead part of the machine is driven up/down by hydraulic piston. It is used to adjust the distance between upper and lower grippers to suite the length of the steel rebar.
- Designed with different capacities (upon user’s request) such as: 300 kN (30 tons) / 600 kN (60 tons) / 1000 kN (100 tons) / 2000 kN (200 tons)
- Capable of testing specimen with diameters ranging from 8 mm to 42 mm depending on the capacity.
- Provides easier and faster reporting with the printing facility for the results and graphs.
- The height is only 200 – 210 cm (depending on the model/capacity).
Compression Testing:
- Used to test the compression strength of concrete cubes/cylinders of different sizes.
- Equipped with an TFT unit that displays the data graphically of each test with the ability to save and recall the results of the tested materials.
- The Data Acquisition Control provides a real-time graphical view for the sample.
- Automatically determines the load rate upon sample type and in accordance with the international standards.
- With the AUTO-STOP functionality, the machine will automatically stop upon finishing the test.
- Upon user requirements, the machine can be either work in fully automatic mode or manual mode at which the user gets the ability to adjust the load rate and period manually.
- The upper seating adjusts itself to apply homogeneous loading on the sample.
- For faster experience while testing, the daylight distance between the upper and lower platens can be adjusted using the hydraulic piston in accordance with the sample height; this will give the machine the ability to test all varieties of samples with a very wide range of sizes.
STANDARDS
ASTM A370 • EN ISO 6892 • EN ISO 7500-1
TECHNICAL SPECIFICATIONS
Tensile Testing:
- Fully Automatic – PC Controlled
- Hydraulically operated grippers by 2 independent auxiliary cylinders controlled by separated hydraulic valves
- Upper mobile crosshead driven up/down by a separated motor adjusting the distance between upper and lower grips with electronic distance meter
- Available models:
- 200 kN (20 tons)
- 600 kN (60 tons)
- 1000 kN (100 tons)
- 2000 kN (200 tons)
- Height: 210 cm only.
- Print of Stress/Strain Diagram and Test Results.
Compression Testing:
- Fully Automatic.
- Graphical – TFT Data Acquisition Control System.
- Automatic Load Rate upon Sample Type.
- Stops Automatically, when Test is completed.
- Real time graph indication.
- Total Load and also Per Area are given.
- Test results can be transferred to computer
- Different units are available.
- Calibration done easily on multiple points
- Manual Control is available.
- Rigid Frame.
- Upper and Lower Platens in accordance with international Specifications.
- Upper Seating for Homogeneous Loading.
- 220 – 240 V / 50 – 60 Hz (110 V / 60 Hz is also available)
ORDERING INFORMATION
| Item | Code |
| UTM, HYDRAULIC – 200 kN | U001A020U |
| UTM, HYDRAULIC – 600 kN | U001A060U |
| UTM, HYDRAULIC – 1000 kN | U001A100U |
| UTM, HYDRAULIC (with Servo Motor) – 1000 kN | U001V100U |
| UTM, HYDRAULIC – 2000 kN | U001A200U |
| ROUND GRIPEPRS SET for U001xxxxx | U001P001H |
| FLAT GRIPPERS SET for U001xxxxx | U001P002H |
| BENDING APPARATUS for U001xxxxx | U001P003H |
| SHEAR APPARATUS for U001xxxxx | U001P004H |
| GRIPPERS PISTON for U 001 | U001P005H |
| HYDRAULIC CONTROLLING UNIT for U001 | U001P006H |
| SPECIAL GRIPPER (08-16-VAN-TT) | U001P007H |
| SPECIAL GRIPPER (16-24-VAN-TT) | U001P008H |
| SPECIAL HYDRAULIC CONTROLLING UNIT (1 Piston) | U001P009H |
| ELECTRONIC CONTROLLING UNIT for U001 | U001P010H |
| SPARE LOADCELL for U001 – 300 kN | U001P011H |
| SPARE LOADCELL for U001 – 600 kN | U001P012H |
| EXTERNAL HYDRAULIC HOSES SET (6 pcs) | U001P013H |
| SPARE RELAY CARD for U001 | U001P014H |
| GRIPPER BACK PLATE for U001 (1 set) | U001P015H |
Keywords: